Lustre Quorum

Disponibilité:

5 + en stock, prêt à être expédié

UGC MHC-2608182016

Quantité

€729,95 - €729,95

€729,95

€729,95 - €729,95

€729,95

Apportez l'équilibre naturel dans votre demeure avec le Lustre Lilypad en Laiton, une fusion captivante entre sculpture cinétique et illumination organique contemporaine. Orné de bras horizontaux étagés supportant des abat-jour en laiton façonnés à la main et inspirés des feuilles de lotus flottantes, ce luminaire suspendu aux formes organiques transforme l'éclairage de plafond en une véritable œuvre d'art vivante. Sous chaque disque de laiton organique, un globe en verre opal dépoli diffuse une lumière douce et sans éblouissement, créant une ambiance chaleureuse et apaisante.

Source Lumineuse

Ampoule de 9 watts maximum (E12 ou E14) requise. (Ampoules non incluses)
Gradable avec des ampoules compatibles.

Dimensions

D 89cm x H 92cm / D 35" x H 36.2"
Chaîne de suspension : 19,7" (Hauteur totale ajustable)

Caractéristiques

Matériaux : Laiton, Verre.
Finitions du corps Noir.
Finition de l'abat-jour : Blanc.
Conforme aux certifications d'Amérique du Nord, d'Australie, d'Europe et du Moyen-Orient.

Ressources du fabricant

Télécharger la fiche technique

Guide d'installation

Voir sur 3D Warehouse

Sécurité des paiements

Lorsque quelque chose ne va pas avec vos transactions admissibles, la protection des acheteurs PayPal et bancaire vous protège. Obtenez un remboursement complet si une commande admissible n'est pas sensiblement conforme à la description ou ne vous arrive pas à votre porte.

The Craft Behind the Light

Cast, Turned, and
Polished by Hand

Every fixture in this collection begins as solid brass — not a plated shell. From the foundry floor to the final buff, each piece passes through the hands of metalworkers before it ever reaches you.

100%

Solid brass, not plated

12+

Hand-polishing passes per piece

6

Stages from raw material to lamp

MaterialRaw brass stock

FormingCast / spun

TurningPrecision machining

PolishingHand-buffed

FinishingLacquered or aged

AssemblyWired & tested

How It's Made

From Raw Stock to Radiant Light

Six stages, done in sequence, most of them by hand. Skip any one and the lamp comes out thin, dull, or short-lived — so we don't skip any of them.

1

Stage 01 · Material

Solid brass, sourced by the rod

Every fixture starts as solid brass rod and sheet stock — a copper-zinc alloy chosen for its weight, workability, and the way it ages. No zinc die-cast base, no plastic core wrapped in a thin coat of color.

Cartridge & naval brass alloysMill-certified stock

2

Stage 02 · Forming

Given its first shape

Solid components — finials, arms, fittings — are sand-cast from molten brass poured at around 1,700°F. Shades and bodies are metal-spun instead: a flat brass disc is pressed against a spinning form until it flows into a shade's curve, a slower and stronger method than stamping.

Sand castingLathe metal spinning

3

Stage 03 · Precision

Trued on the lathe

Cast and spun parts come off rough. Each is chucked onto a lathe and turned true — walls brought to even thickness, threads cut for sockets and finials, edges faced flat so every joint seats without a gap.

±0.1mm toleranceThread-cut by hand

4

Stage 04 · Finish Work

Buffed in three grades

A rough tripoli compound cuts down casting marks and tool lines first. A finer rouge compound follows, brought up by hand against a cloth buffing wheel until the surface holds a genuine mirror — not a sprayed sheen.

Tripoli cutRouge polish12+ passes

5

Stage 05 · Protection or Age

Sealed bright, or aged on purpose

Polished pieces are sprayed with a clear protective lacquer to hold their shine against tarnish. Antiqued pieces instead go through a chemical patina bath, then are hand-rubbed back at the high points — so the aged look sits in the grooves, the way decades of real wear would leave it.

Clear-coat lacquerHand-rubbed patina

6

Stage 06 · Final Checks

Wired, lit, and checked by hand

Sockets, wiring, and hardware are assembled and every unit is powered on before it's packed. A finisher runs a hand over every surface for burrs or missed spots — the last inspection is still a person, not a scanner.

100% powered-on testedHand-inspected

Why It Matters

Solid Brass, Not a Coating

Many "brass" fixtures are zinc alloy or steel with a few microns of brass plating — a finish that can wear through at edges and corners within a year or two, exposing a dull grey base underneath.

Ours is brass all the way through. There's no coating to wear off, because there's nothing underneath it to expose. A scratch on a solid brass piece reveals more brass — and can simply be re-polished away.

SolidSame metal, edge to edge

RepairableRe-polishes, not re-plates

WeightedGenuine mass in hand

Breaking Down the Material

Brass Isn't One Recipe

"Brass" isn't a single formula — the copper-to-zinc ratio changes both the properties and the use case. We choose the alloy for each part based on the load and setting it needs to handle, rather than using one blend throughout.

C27000

Cartridge Brass

Copper 65%Zinc 35%

The most ductile common brass alloy — well suited to stamping and deep drawing, resists cracking, with a warmer gold tone.

Used for Stamped shade components, thin-walled spun parts

C36000

Free-Cutting Brass

Copper 61%Zinc 36%Lead 3%

A small lead addition produces shorter chips and a smoother finish when turned, giving higher precision and efficiency on the lathe.

Used for Threaded fittings, sockets, precision-turned structural parts

C46400

Naval Brass

Copper 60%Zinc 39.2%Tin 0.8%

A small tin addition significantly boosts corrosion and dezincification resistance, so it stays sound even in prolonged humidity.

Used for Bath, outdoor, and high-humidity fixture components

In the Workshop

Where the Work Actually Happens

Casting the molten brass, buffing on the wheel, precision-turning on the lathe, through to final inspection on the rack — every stage happens on this floor, to the same standard, every time.

Finish Options

One Metal, Three Characters

The same solid brass, carried to a different finish — the difference happens at Stage 05, not sprayed on afterward. The shine, the aging speed, and the spaces each one suits all differ too.

Polished Brass

Buffed to a mirror at high speed, fine-grained, in the warm golden reflection of natural brass.

Shine★★★★★ Mirror reflection

AgingVery slow — sealed under lacquer before it ships

SuitsModern luxe, boutique display, formal receiving rooms

Antique Brass

Chemically aged, then hand-rubbed for color — the recesses run darker, giving it weight and depth.

Shine★★☆☆☆ Low, diffuse light

AgingNearly static — the aged color is already fixed and sealed

SuitsAmerican vintage, industrial, period-home renovations

Satin Brass

An even, fine-grained brushed texture that reflects a soft, satin-like matte sheen.

Shine★★★☆☆ Soft, diffuse glow

AgingSlow — the brushed texture naturally hides tarnish marks

SuitsNordic modern, Japanese minimalist, boutique offices

The Seventeen You Can Actually Order

The three characters above describe how a finish behaves. What you specify is one of seventeen numbered finishes — or a custom patina grown to match a sample you send us.

Finishes 01–17 · brass, bronze, iron, steel, nickel, chrome, black · custom patinas matched on request

◈ Specifying a Finish

Order by number, not by name. "Antique brass," "aged brass," "burnished brass" — ask five workshops what those mean and five different metals come back. Finish 04 is the same physical sample in our studio, on the atelier bench, and on your packing list.

And because no screen renders metal honestly, we ship the physical panels before anything is committed. Hold them against your cabinetry and wall paint, at the hour you actually use the room — then send the number.

Before It Ships

What We Check, Every Single Time

Standards that apply to every fixture that leaves the workshop — not a sample batch.

Powered-On Test

Every unit is wired and lit before packing — not spot-checked.

Weight Check

Weighed against spec — a light piece signals a thin or hollow cast.

Tarnish Testing

Lacquer coats are checked for even coverage before final polish.

Hand Inspection

A finisher runs a hand over every surface for burrs or missed spots.

Everyday Care

A Patina That Only Gets Better with Time

Solid brass oxidizes naturally over time — that's its nature, not a flaw. A little care keeps the shine even and lasting longer.

Daily Dusting

Wipe the surface weekly with a dry soft cloth or feather duster to keep dust and grime from settling into the texture.

Anti-Tarnish Care

On polished pieces, apply a thin layer of dedicated brass wax every 3–6 months for an extra layer of protection over the lacquer.

Environment

Avoid prolonged exposure to damp, salt spray, or direct kitchen smoke — take extra care above bathtubs and stovetops.

What to Avoid

Never use bleach, alcohol, or abrasive cleaners — these chemicals corrode the lacquer and speed up surface clouding.

The antique finish needs no extra waxing — its surface has already been chemically aged and color-fixed. The handprints and subtle shading it picks up with everyday use are exactly the look this finish is meant to have.

In the End

Made to Be Used, and to Last

A solid brass fixture doesn't stay new — it ages, and that's the point. Years from now, it should still be the same metal it started as, just with a little more history in it.

Certifié en Amérique du Nord

Certifié aux normes de sécurité nord-américaines

Livraison rapide et gratuite

Découvrez la livraison le même jour
sur des milliers de modèles.

Service client expert

Aide rapide et conviviale par
téléphone, chat ou e-mail.

Valeurs exceptionnelles, toujours

Soutenu par notre politique de
protection des prix de 120%.

Esthétique d'éclairage spatial

Lustre

Lampe suspendue

Plafonnier

Lampadaire

Lampe de table

Applique

Luminaires personnalisés

Nous nous engageons à transformer vos idées les plus imaginatives en réalité extraordinaire. N'hésitez pas à partager vos pensées librement.

Nous Contacter